Page 2
16" - 24" SET-UP PROCEDURES NOTES We recommend Next, tighten that you first fit the “fixed” hose the lower por- end into the gun tion of the handle mounted onto into the mounting the upper portion brackets on the of the handle. cover and secure Use teflon tape with the bolts or...
7 GPM at 4000 PSI. Please note washer, you can tap off the outer shell with a rubber that the 12" Whirl-A-Way can only be used with a pressure hammer while the output shaft is held in a vice. The washer producing up to 2500 PSI.
Should your surface cleaner not be used for long periods of time, it is recommended that you remove the hose from the top of the rotary head and a vegetable oil be used to lubricate the swivel head’s internal parts. Manually turn the rotary arm to allow lubrication of all internal parts before storing.
Page 5
PARTS BREAKDOWN 12" SETUP & APPLICATIONS BE-2000WAWS CONNECTING & RECONNECTING THE M22 HOSE Part # Description Bracket, Mounting Head 20" 85.791.002 Before use with gun, lance, or longwand ensure that the M22 is connected properly. Rotary Head, 20" 85.790.004 85.419.117 Mounting Blocks 85.238.057...
Page 6
PARTS BREAKDOWN ATTACH TO LONGWAND Attach to a longwand for cleaning hard to reach surfaces. Connect to longwand using the QC fit- tings on the longwand and Whirl-A-Way. Ensure the M22 hose is connected properly before use. USE WITH A SPRAY GUN KIT (OPTIONAL KIT #85.400.066) The 12"...
Need help?
Do you have a question about the WHIRL-A-WAY BE-1200WAW and is the answer not in the manual?
Questions and answers