Upgrading The Device And Transferring Files; Updating The Ut880 System Firmware; Using A Sd Drive - NEC UT880 Owner's Manual

Smart desk set (sds) phone
Hide thumbs Also See for UT880:
Table of Contents

Advertisement

Issue 1.0
U
S
6
PGRADING THE
ECTION
6.1
6.2
2 - 10
D
EVICE AND

Updating the UT880 System Firmware

UT880 firmware update can only be downloaded via the Internet from the
settings page of the phone so UT880 access to the Internet is required.
To update the firmware.
1.
Go to desk top of the UT800.
2.
Choose the Applications
3.
Choose Settings, then select About Tablet.
4.
Choose System updates then Check now. If an update is available you will
be prompted to download the update. If no update is required the phone will
state your system is up to date and no further action is required.
5.
Once the download has finished you will be prompted to install the update.
6.
The update will take several minutes to finish during which it will reboot.
None of the Multiline Telephone application settings are lost during this
process.

Using a SD Drive

1.
Download Multiline Telephone application file to the support PC.
2.
Insert Micro SD drive in the support PC.
3.
Copy upgrade file to the Micro SD drive.
4.
Remove Micro SD drive from the support PC.
5.
Insert the Micro SD drive into the UT880. There is a small slot for this drive
located underneath the phone on the front side.
6.
Go to desk top of the UT800.
7.
Choose the Applications
8.
Start Open Manager.
9.
Choose the Home (House) icon at the top of the screen. This should take
you to the Micro SD drive.
10.
Choose upgrade .apk file. When prompted, agree to the service conditions
and choose to install.
T
F
RANSFERRING
icon at the bottom center of the desktop.
icon at the bottom center of the desktop.
UT880
ILES
Basics

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents