Table of Contents
Advertisement
03
Connecting an MHL-compatible device
An MHL-compatible mobile device can be connected to enjoy 3D/Full-HD videos, high quality multi-channel
audio, and photos etc., with charge the battery on the receiver. Use the MHL cable to connect the device.
IN
1
( DVD )
IN
1
BD IN
IN
2
IN
3
IN
4
IN
6
IN
MHL
7
(DVD)
(SAT/CBL)
(DVR/BDR)
(OUTPUT 5 V
0.9 A MAX)
%
Switch the receiver into standby then use the MHL cable to connect your MHL enabled
device to the MHL terminal on the rear panel of this receiver.
! To automatically switch to the MHL input when an MHL-compatible device is connected, see
page 106
.
! The MHL-compatible device is recharged whenever it is connected to this unit. (Recharging is enabled only
when the unit's power is turned on.)
! For instructions on playing the MHL-compatible device, see
! Do not place the MHL device on this unit which has the power turned on.
Connecting an HDMI-equipped component to the front panel
input
iPod iPhone
DIRECT CONTROL
Video camera (etc.)
BD IN
IN
IN
IN
IN
IN
MHL
2
3
4
6
7
( SAT/CBL )
( DVR/BDR )
( OUTPUT 5 V
0.9 A MAX )
MHL cable
MHL enabled
device
MHL Setup
Playing an MHL-compatible device
on
AUTO/ALC/
DIRECT
STATUS
BAND
TUNER EDIT
HDMI 5 INPUT
5V
1 A
Connecting to a wireless LAN
The wireless LAN converter can be connected to connect this unit to a network wirelessly. Use the included
AXF7031 for connection.
! Use only the furnished accessory connecting cable.
! Certain settings are required to use a wireless LAN converter (AXF7031). For instructions on making these set-
tings, see the operating instructions included with the wireless LAN converter (AXF7031).
LAN
(10/100)
DC OUTPUT
for WIRELESS LAN
( OUTPUT 5 V
0.6 A MAX )
on
Wireless LAN converter (AXF7031)
page 57
.
44
Connecting your equipment
LAN
(10/100)
DC OUTPUT
for WIRELESS LAN
(OUTPUT 5 V
0.6 A MAX)
Modem
Internet
Router
WAN
Advertisement
Table of Contents
