Connecting To The Network Through Lan Interface - Pioneer SC-LX58-K Operating Instructions Manual

Hide thumbs Also See for SC-LX58-K:
Table of Contents

Advertisement

03
Multi-zone connection using the HDMI terminal and speaker terminals (HDZONE)
Important
! The settings must be changed at ZONE Setup in order to use the HDZONE function
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see
Setup
on
page 74
.
! You must select HDZONE in
Speaker system setting (page 102
1
Connect a pair of speakers to the surround back speaker terminals.
You should have a pair of speakers attached to the surround back speaker terminals as shown below.
2
Connect a TV monitor to the HDMI OUT 3 (HDZONE) terminal on this receiver.
Sub zone (HDZONE)
HDMI IN
2
L
R
1
(page 108
).
) to use this setup.
Main zone
OUT 1
OUT 2
OUT 3
(CONTROL)
(HDZONE)
SELECTABLE
OUT 1
OUT 2
OUT 3
(CONTROL)
(HDZONE)
SELECTABLE
SURROUND BACK
R

Connecting to the network through LAN interface

By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen
to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
When connected in this way, you can play audio files stored on the components on the local network, including
HDMI
your computer.
A
SURROUND BACK
R
L
(Single)
to LAN port
NAS
A
L
(Single)
Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server func-
tion, it is necessary to set up the network manually. For details, see
LAN terminal specifications
! LAN terminal : Ethernet jack (10BASE-T/100BASE-TX)
Notes
! Refer to the operation manual of the equipment you have as the connected equipment and connection method
may differ depending on your Internet environment.
! When using a broadband Internet connection, a contract with an Internet service provider is required. For
more details, contact your nearest Internet service provider.
42
Connecting your equipment
LAN
(10/100)
LAN
(10/100)
Computer
LAN
3
2
1
WAN
LAN cable (sold separately)
to LAN port
Network Setup menu
 
 
 
Internet
 
Modem
Router
on
page 105
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-lx58-sSc-lx58

Table of Contents