Table of Contents
Advertisement
03
Connecting a USB device
It is possible to play audio and photo files by connecting USB devices to this receiver.
iPod iPhone iPad
DIRECT CONTROL
with USB
%
Switch the receiver into standby then connect your USB device to the USB terminal on the
front panel of this receiver.
! This receiver does not support a USB hub.
! For instructions on playing the USB device, see
Connecting an MHL-compatible device
An MHL-compatible mobile device can be connected to enjoy 3D/Full-HD videos, high quality multi-channel
audio, and photos etc., with charge the battery on the receiver. Use the MHL cable to connect the device.
iPod iPhone iPad
DIRECT CONTROL
with USB
MHL enabled
device
%
Switch the receiver into standby then use the MHL cable to connect your MHL enabled
device to the MHL terminal on the front panel of this receiver.
! To automatically switch to the MHL input when an MHL-compatible device is connected, see
page
105.
! The MHL-compatible device is recharged whenever it is connected to this unit. (Recharging is enabled only
when the unit's power is turned on.)
! For instructions on playing the MHL-compatible device, see
AUTO/ALC/
DIRECT
HOME THX
BAND
TUNER EDIT
HDMI 5 INPUT/
5V
2.1 A
MHL ( 5V
0.9 A )
USB mass
storage device
Playing a USB device
on
page
54.
AUTO/ALC/
DIRECT
HOME THX
BAND
TUNER EDIT
HDMI 5 INPUT/
5V
2.1 A
MHL ( 5V
0.9 A )
MHL cable
MHL Setup
Playing an MHL-compatible device
Connecting an HDMI-equipped component to the front panel
input
Using a USB cable to connect to a computer
SC-79 only
By using a USB cable (sold separately) to connect this unit's USB-DAC IN terminal to the USB port on a com-
puter, this unit can be used as a D/A converter.
For details regarding the output of signals input to the USB-DAC IN terminal, see
on
page
56.
Important
! The exclusive driver must be installed on the computer in order to play high sound quality files of over
48 kHz/24 bits.
The driver software is provided on the included CD-ROM (AVNavigator).
! When installing the driver, this receiver and the computer must be connected as shown below. After connect-
ing, turn this receiver's power on and select the USB-DAC input for the main zone. Note that for Mac OS, there
is no need to install the driver software.
on
on
page
55.
43
Connecting your equipment
iPod iPhone iPad
AUTO/ALC/
DIRECT CONTROL
DIRECT
HOME THX
BAND
TUNER EDIT
with USB
HDMI 5 INPUT/
5V
2.1 A
MHL ( 5V
0.9 A )
Video camera (etc.)
Computer
USB-DAC
USB
USB-DAC
IN
IN
A-Type
B-Type
Playing music from a computer
Advertisement
Chapters
Table of Contents
