Table of Contents
Advertisement
04
The Input Setup menu
You only need to make settings in the Input Setup menu if you didn't hook up your digital equipment according
to the default settings (see
Input function default and possible settings
tell the receiver what equipment is hooked up to which terminal so the buttons on the remote control correspond
to the components you've connected.
! With factory default settings, the on-screen display will be output from all HDMI output terminals and
displayed on any TV connected via HDMI cable. You can change where the screen is output in the
MAIN/HDZONE
(page 108
) and HDMI output
1
Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and
then press HOME MENU.
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
2
Select 'System Setup' from the HOME MENU.
3
Select 'Input Setup' from the System Setup menu.
4.System Setup
A/V RECEIVER
a . Manual SP Setup
b . Input Setup
c . OSD Language
d . Network Setup
e . HDMI Setup
f . MHL Setup
g . Other Setup
Exit
4
Select the input function that you want to set up.
The default names correspond with the names next to the terminals on the rear panel (such as DVD or SAT/CBL
which, in turn, correspond with the names on the remote control.
5
Select the input(s) to which you've connected your component.
For example, if your DVD player only has an optical output, you will need to change the DVD input function's
Audio In setting from COAX-1 (default) to the optical input you've connected it to.
6
When you're finished, proceed to the settings for other inputs.
There are optional settings in addition to the assignment of the input jacks:
! Input Name – You can choose to rename the input function for easier identification. Select Rename to do so,
or Default to return to the system default.
! Input Skip – When set to ON, that input is skipped when selecting the input using ALL. (DVD and other
inputs can be still be selected directly with the input function buttons.)
! 12V Trigger 1/2 – After connecting a component to one of the 12 volt triggers (see
and off using the 12 volt trigger
on
page 45
), select MAIN, ZONE 2, ZONE 3, HDZONE or OFF for the cor-
responding trigger setting to switch it on automatically along with the (main or sub) zone specified.
— Devices connected to 12 volt triggers can be associated with HDMI OUT switching. For details, see
Setup
on
page 74
.
7
When you're finished, press RETURN.
You will return to the System Setup menu.
on
page 50
). In this case, you need to
(page 83
) settings.
4b.Input Setup
A/V RECEIVER
Input
:
DVD
Input Name
:
Rename
Input Skip
:
OFF
Audio In
:
COAX-1
HDMI Input
:
Input-1
Component In
:
In-1
12V Trigger 1
:
OFF
12V Trigger 2
:
OFF
Return
Exit
Return
Switching components on
Input function default and possible settings
The terminals on the receiver generally correspond to the name of one of the input functions. If you have con-
nected components to this receiver differently from (or in addition to) the defaults below, see
menu
on
page 50
to tell the receiver how you've connected up. The dots (k) indicate possible assignments.
Input function
BD
DVD
SAT/CBL
DVR/BDR
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
(front panel)
HDMI 6
HDMI 7/MHL
INTERNET RADIO
MEDIA SERVER
FAVORITES
iPod/USB
TV
CD
TUNER
BT AUDIO
a When ARC at HDMI Setup is set to ON, it is not possible to make assignments to the TV input's Audio In terminals.
b Only the TV and CD inputs can be assigned to ANALOG-1.
HDMI
50
Basic Setup
The Input Setup
Input Terminals
HDMI
Audio
Component
(BD)
IN 1
COAX-1
IN 1
IN 2
COAX-2
k
IN 3
OPT-2
IN 2
k
k
k
IN 4
IN 5
IN 6
IN 7
OPT-1
<a>
ANALOG-1
<b>
Advertisement
Table of Contents
