Before First Use - Electrolux ESL 6370RO User Manual

www.electrolux.com
8
How to deactivate again the acoustic
signal for the end of programme
1. Refer to "How to activate the acoustic
signal for the end of programme" and
follow the procedure from step (1) to
step (3).
2.
Press
• The indicators of
•
The indicator of
flash.

6. BEFORE FIRST USE

1. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
6.1 Adjusting the water softener
German
degrees
(°dH)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
.
and
go off.
continues to
Water hardness
French
degrees
(°fH)
91 - 125
76 - 90
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
< 7
• The end indicator comes on.
3.
Press
off. The acoustic signal for the end of
programme is deactivated.
4. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
If you use the combi detergent
tablets, activate the Multitab op-
tion.
mmol/l Clarke
degrees
9.1 - 12.5 64 - 88
7.6 - 9.0 53 - 63
6.5 - 7.5 46 - 52
5.1 - 6.4 36 - 45
4.0 - 5.0 28 - 35
3.3 - 3.9 23 - 27
2.6 - 3.2 18 - 22
1.9 - 2.5 13 - 17
0.7 - 1.8 5 - 12
< 0.7 < 5
. The end indicator goes
Water softener
adjustment
Manual Elec-
tronic
1)
2
1)
2
1)
2
1)
2
1)
2
1)
2
1
1
1
2)
1
10
9
8
7
6
1)
5
4
3
2
2)
1