Advertisement
Installing Overhead (Recommended)
1.
Select a suitable location for the mount on your vehicle.
If using the mounting plate, center the mounting plate on your vehicle's
2.
overhead rails.
3.
Align the four holes in the vehicle mount with the holes in the mounting
plate.
4 . Use the four mounting screws and lock washers to attach the vehicle
mount to your vehicle.
5 . Wire the printer to your vehicle as needed. See "Electrical
Specifications" for input information.
Mounting screw
Lock w asher
Mounting plate
Battery
charging cable
Fuse holder
LEDs
3
Advertisement
