Table of Contents
Advertisement
;dot codes
NOTE: The parameters ROW, COLUMN,
LINES and DOTS exist to
maintain the 9420/9440 data
structure. These parameters are
not used by the
9425/9445/9465/9474 printers,
but must be in the data stream.
The values can be valid 9420
values, or can be set to 0.
The first row of dot codes corresponds to
the bottom row of dots in the image.
Essentially, this means you are building
the graphic image upside down in the data
stream.
Note that since this record is a character
string, it begins with a semi-colon (;). You
can place up to 100 characters in each
row.
Do not put any spaces in the dot code
character string.
5. Using Graphics
5-5
Advertisement
Table of Contents
