Table of Contents
Advertisement
9400 Series Programmer's Manual
REP
PARTS
RESERVED
MODE
4-28
One to four digits for the supply repetition
for cutting, and increment/decrement field.
Values:
1-9999
One digit for the number of parts across
the supply.
Values:
1-5
Enter 0.
One character to define the mode of
printing, or batch separator.
Values:
0 = separator off.
1 = double length separator (use for 924
or 925 stacker). 3 mm extra length
tag on 920 stacker.
2 = normal length separator with 3 mm
black stripe.
3 = 3 mm extra length tag with 6 mm
stripe.
NOTE: If using value 0,1, 2, or 3, do not
use a separate batch separator
packet.
C = Continuous
D = On Demand (not available on 9425
printer)
NOTE: If you enter D (On Demand) in the
MODE field on a printer with a
knife, the value will default to C
(Continuous).
Advertisement
Table of Contents
