Table of Contents
Advertisement
ROW
COL
One to four digits to define the row
location of the field on the supply. This is
the distance from the the guide edge zero
point at the bottom of the supply and the
bottom of the field.
The zero point is 1.5 mm or 0.060 inches
from the bottom of the supply. The bottom
of the supply is the edge that exits the
printer first.
This value is measured in tenths of
millimeters (TOMMS) and must be less
than the maximum length of the supply.
Values:
0-2032
NOTE: The minimum row location for
serial bar code fields is
9425
16 (0.06 inches)
9445
16 (0.06 inches)
9465
16 (0.06 inches)
9474
23 (0.09 inches)
One to four digits to define the column
location of the field on the supply. This is
the distance from the guide edge zero
point at the left edge of the supply and the
left edge of the field.
The zero point is 1.5 mm or 0.060 inches
from the left edge of the supply.
The unit of measurement is tenths of
millimeters. The range must be less than
the maximum width of the supply.
Values:
9425
0-508 (0 to 2 inches)
9445
0-1016 (0 to 4 inches)
9465
0-1016 (0 to 4 inches)
9474
0-1016 (0 to 4 inches)
4. Message Structures
4-15
Advertisement
Table of Contents
