G.
Clamp the radiator breather
hose, CDI magneto lead and
neutral switch lead to the frame.
H.
Pass the CDI magneto lead, ra-
diator breather hose and neutral
switch lead in front of the radia-
tor hose. Then pass the radiator
breather hose inside the CDI
magneto lead and neutral switch
lead.
I.
Pass the radiator breather hose
and ignition coil lead between
the frame and the radiator (left).
J.
Locate the clamp ends in the ar-
rowed range.
K.
Bring the connector cover into
contact with the coupler.
CABLE ROUTING DIAGRAM
2-17