Serial Ata Connectors; Chassis Instrusion Connector - DFI Blood-Iron G41-T33 User Manual

E
English

Serial ATA Connectors

Parallel
1 7
SATA 4 SATA 3
SATA 2 SATA 1
The Serial ATA connectors are used to connect Serial ATA devices. Connect one
end of the Serial ATA cable to a SATA connector and the other end to your Serial
ATA device.

Chassis Instrusion Connector

Parallel
1 2
Signal
Ground
The board supports the chassis intrusion detection function. Connect the chas-
sis intrusion sensor cable from the chassis to this connector. When the system's
power is on and a chassis intrusion occurred, an alarm will sound. When the
system's power is off and a chassis intrusion occurred, the alarm will sound only
when the system restarts.
18