Usb Power Select - DFI Blood-Iron G41-T33 User Manual

E
English

USB Power Select

Parallel
These jumpers are used to select the power of the USB ports. Selecting 5V_
standby will allow you to use a USB device to wake up the system.
BIOS Setting
"USB KB Wake-Up From S3" in the Power Management Setup submenu of the
BIOS must be set to Enabled. Refer to chapter 3 for more information.
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB
ports, the 5V_standby power source of your power supply must support
≥1.5A. For 3 or more USB ports, the 5V_standby power source of your
power supply must support ≥2A.
12
USB 0-3
3
(JP3)
2
1
1-2 On: 5V
(default) 5V_standby
USB 4-7
1 2 3
(JP2)
1-2 On: 5V
(default) 5V_standby
3
2
1
2-3 On:
1 2 3
2-3 On: