Copy Setup - Samsung SCX-6x45 Series User Manual

Option
Energy Saver
Tray
Management
Altitude
Adjustment
Output Options
Contention
Management
Downloaded From ManualsPrinter.com Manuals
Description
You can reduce energy consumption by setting
these features. Energy Saver has three
options, first Low Power Mode to Sleep Mode
turns off the scanner lamp under the glass. And
Power Save turns off all the fans within the
machine after a certain time. Standby to Low
Power Mode turns off the fans within the
machine except a core fan for the fuser unit.
(Page 3.4)
This feature allows you to select the tray and
paper you use for a printing job. Paper size,
paper type, and paper color options are
adjusted here. Tray Confirmation Message is
to activate the window asking whether you set
the paper size and type for the just opened tray.
• Auto Tray Switch: If tray1 and tray2 are filled
with letter size paper, when tray1 is empty
and this option is On, then the machine
continues printing with paper in tray2.
• Auto Continue: When the paper is
mismatched, meaning that tray1has filled with
the letter size paper, but the printing job
needs A4 size paper, the machine will wait for
30 seconds to paper in tray1 with proper
sized paper. After 30 seconds, the machine
automatically starts printing with Letter sized
paper.
Print quality is affected by atmospheric
pressure, which atmospheric pressure is
determined by the height of the machine above
sea level. This feature lets you adjust the
altitude in a height district. Higher altitude
location need to set this feature to High 3,
which affects print quality.
Output Options is for, when the staples run
out, you to let the machine stop processing and
wait to refill the staples or continue the job. If
you set Within Job Offsetting to On, the
output paper is placed and sorted by printout-
sets.
This feature lets you to select the priority
between copy jobs and print jobs.
• Priority: Set the priority by numbering the
job. The machine starts from the least to the
highest number in order.
• First In, First Out: The machine does an
asked job in order.
Option
Sound You can adjust the loudness of the machine
sound. Press Fault to adjust the machine's
error sound. Select Conflict if you pressed the
wrong option. Press Selection to sound
whenever you press the selection from your
touch screen.
Supplies The machine gives you the notification of the
Management drum and toner to reorder, and resets the used
fuser counter, bias transfer roller, feed roller and
document feeder friction pad counter.
Machine Test The machine prints the test image patterns
using Image Quality Test Patterns.
On Demand You can set the machine to delete previous job
Overwrite information on HDD as you store new job
information. To activate this feature, go to
Admin Setting > the Setup tab > Optional
Service and set the On Demand Image
Overwrite option to Enable. After activating
this feature you can overwrite a HDD by
pressing Start in the display.
For copy output, you can set up several options in advance.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, enter
password and press OK.
3 Press the Setup tab > Copy Setup.
Option
Page Number If you select this option On, each copy will
include the page number on the bottom of each
page.
Time & Date Set this option On in order to print the date and
time on each copy, set from the General tab.
9.3
<Machine status and advanced setup>
Description

Copy Setup

Description