Network Setup - Samsung SCX-6x45 Series User Manual

Option
Prefix Dial
Junk Fax
Number List
Ring Volume
Dial Tone
Volume
Output Option
Mailbox Setup
Output Tray
Toll Save
Send Batch
Fax Forward
Settings
a. Private Automatic Branch Exchange
Downloaded From ManualsPrinter.com Manuals
Description
This feature allows you to set a prefix of up to
five digits. This number will be dialed before any
automatic number is dialed. User may set this
a
to access a PABX (example 9) or area code
number (example 02).
The machine does not accept faxes sent from
remote stations if their numbers are stored in
the memory as junk fax numbers. You can enter
a maximum of 10 junk fax numbers. Press
Junk Fax Number List and Edit and enter the
last numbers (1~7 digit) of the fax number.
This feature adjusts the ring volume. When you
select Off, the machine does not ring.
When you press On Hook Dial to send a fax,
you can hear a specific tone. To adjust the tone
volume, you can use this feature. Value Low
volume is the lowest.
You can set the machine to print out the fax on
both sides of the paper, or stapled. (Page 6.5)
• Document Policy: You can set the document
stored in Mailbox to delete or retain
documents after. Select On of each option to
delete, Off to remain the data.
• Mail Configuration: You can create, edit, or
delete Mailbox. Enter Mailbox ID, Mailbox
Name, Mailbox Passcode by pressing
options. (Page 6.9)
Note:
If you set the Notification option to On,
you are notified when a fax is received in
Mailbox. (Page 6.9)
This feature lets you select the paper tray to
use for receiving a fax.
Set the machine to send a fax in the toll save
time for saving. (Page 6.10)
The machine asks you whether you want to add
the documents to the reserved delay fax, if the
fax number you have dialed is same as the
delay fax number. (Page 6.10)
You can forward a sent or received fax to other
destination by a fax or an email. (Page 6.11)

Network Setup

You may set up the network with the machine's touch screen. Before
doing that, you must have the information concerning the type of network
protocols and computer system you use. If you are not sure which setting
to use, contact your network administrator to configure this machine
network.
For further explanation about network environment, refer to Network
Printer User's Guide within Network Utilities CD.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, enter
password and press OK.
3 Press the Setup tab > Network Setup.
Option
TCP/IP Protocol Select appropriate protocol and configure
parameters to use the network environment.
Note:
therefore, if you are not sure, leave as it is, or
consult the network administrator.
NetWare Setting This machine is compatible with Novell
NetWare networks. You can print to the network
printer from any NetWare client.
Apple Talk For Macintosh network environments, select
Protocol this option. This option provides packet
transmission and routing functionality for
networking.
9.5
<Machine status and advanced setup>
Description
There are lots of parameters to be set,