Change Default; Auto Report; Copy Setup; Changing The Copy Setup Options - Samsung CLX-6220 Series User Manual

Multi-functional printer
Hide thumbs Also See for CLX-6220 Series:
Table of Contents

Advertisement

Option
Stamp RCV Name
Rcv Start Code
Auto Reduction
Discard Size
Junk Fax Setup
DRPD Mode
Duplex Print
Downloaded from
www.Manualslib.com
Description
This option allows the machine to automatically
print the page number, and the date and time of
reception at the bottom of each page of a
received fax.
This code allows you to initiate fax reception
from an extension phone plugged into the EXT
socket on the back of the machine. If you pick up
the extension phone and hear fax tones, enter
the code. It is preset to *9* at the factory.
When receiving a fax containing pages as long
as or longer than the paper loaded in the paper
tray, the machine can reduce the size of the
original to fit the size of the paper loaded in the
machine.
Turn on this feature if you want to automatically
reduce an incoming page.
With this feature set to Off, the machine cannot
reduce the original to fit onto one page. The
original will be divided and printed in actual size
on two or more pages.
When receiving a fax containing pages as long
as or longer than the paper in your machine, you
can set the machine to discard a specific length
from the end of the received fax. The machine
will print the received fax on one or more sheets
of paper, minus the data that would have been
on the specified discard segment.
When the received fax contains pages larger
than the paper in your machine, and Auto
Reduction has been turned on, the machine will
reduce the fax to fit on the existing paper, and
nothing will be discarded.
This setting may not be available depending on
your country. Using this feature, the system will
not accept faxes sent from remote stations
whose numbers are stored in the memory as
junk fax numbers. This feature is useful for
blocking any unwanted faxes.
When you turn on this feature, you can access
the following options to set junk fax numbers.
Add: Allows you to set up to 10 fax
numbers.
Delete: Allows you to delete the desired
junk fax number. If you select Delete All,
Allows you to delete all junk fax numbers.
This setting may not be available depending on
your country. This mode enables a user to use a
single telephone line to answer several different
telephone numbers. In this menu, you can set
the machine to recognize which ring patterns to
answer. For details about this feature, see
"Receiving faxes using DRPD mode" on page 5.
Set this duplex feature to save paper. When the
machine prints the received fax data, it prints
them on both sides of the paper. For details
about this feature, see "Printing received faxes
on both sides of the paper" on page 5.
Machine status and advanced feature_ 2
manuals search engine
Option
Doc Box Saving
This menu only appears when an optional hard
disk drive (HDD) has been installed. With this
feature set to On, allows you to store received
faxes in the common box.

Change default

Option
Resolution
Changing the resolution setting affects the
appearance of the received document.
Standard: Originals with normal sized
characters.
Fine: Originals containing small characters
or thin lines or originals printed using a
dot-matrix printer.
Super Fine: Originals containing extremely
fine detail. Super Fine mode is enabled only
if the machine with which you are
communicating also supports the Super
Fine resolution.
Photo Fax: Originals containing shades of
gray or photographs.
Darkness
You can select the default contrast mode to fax
your originals lighter or darker.
Scan Size
Sets the image size.
The scan size options may vary between
document feeder or scanner glass.

Auto Report

You can set the machine to print a report with detailed information about the
previous 50 communication operations, including time and dates.
For further details, see "Printing sent fax report automatically" on page 9.

Copy setup

Changing the copy setup options

For copy output, you can set up several options in advance.
1. Press
(Copy) on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Copy Setup and press OK.
Description
Description
•For memory transmission, Super Fine
mode is not available. The
resolution setting is automatically
changed to Fine.
•When your machine is set to Super
Fine resolution and the fax
machine with which you are
communicating does not support
Super Fine resolution, the machine
transmits using the highest
resolution mode supported by the
other fax machine.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clx-6250 series

Table of Contents