Samsung SCX-6x45 Series User Manual page 90

Message
Jam in Tray 2
Jam in Tray 3
Jam in Tray 4
LSU Hsync Error
LSU Motor Error
Main motor failure
MCB to DADF
Communications
Fault
MCB to NIC
Communications
Fault
MCB to Tray 2
Communications
Fault
MCB to Tray 3
Communications
Fault
MCB to Tray 4
Communications
Fault
MCB Watchdog
Detects Software
Failure
Memory Failure
Network cable is
disconnected
Network card is
not installed
Downloaded From ManualsPrinter.com Manuals
Meaning Suggested solutions
Paper has jammed Clear the jam.
in the feeding area (Page 11.2 and
of the tray. page 11.3)
A problem has Unplug the power
occurred in the LSU cord and plug it back
(Laser Scanning inches. If the problem
Unit). persists, please call
for service.
There is a problem Unplug the power
in the motor unit. cord and plug it back
in. If the problem still
persists, please call
for service.
The communication Turn the machine off
error has occurred. and turn it on again. If
the problem persists,
please call for
service.
MCB software is not Turn the machine off
responding. and turn it on again. If
the problem persists,
please call for
service.
Memory access Turn the machine off
failed. and turn it on again. If
the problem persists,
please call for
service.
The network cable is Connect the network
disconnected. cable properly.
The network card Turn the machine off
does not work and turn it on again. If
properly. the problem persists,
please call for
service.
Message
Non Genuine The drum cartridge
Drum, Replace installed is not a
Drum genuine cartridge.
This message
appears when you
selected Continue
at Non Genuine
Drum, Replace
Drum prompt.
Non Genuine The drum cartridge
Drum, Replace installed is not a
Drum1 genuine cartridge.
This message
appears when you
selected Stop at
Non Genuine
Drum, Replace
Drum1 prompt.
Non Genuine The toner cartridge
Toner, Replace installed is not a
Toner genuine cartridge.
This message
appears when you
selected Continue
at Non Genuine
Toner, Replace
Toner prompt.
Non Genuine The toner cartridge
Toner, Replace installed is not a
Toner1 genuine cartridge.
This message
appears when you
selected Stop at
Non Genuine
Toner, Replace
Toner1 prompt.
Output Bin full The printed papers
are full on the output
tray.
Paddle Fault Paddle unit is not
operating.
11.11
<Troubleshooting>
Meaning Suggested solutions
Install the Samsung-
genuine drum
cartridge.
Install the Samsung-
genuine drum
cartridge.
Install the Samsung-
genuine toner
cartridge.
Install the Samsung-
genuine toner
cartridge.
Remove printed outs
from the output tray.
Open the finisher
door and clear any
jammed paper (if
there is). If this error
message shows on
the screen again,
cycle power. If the
problem persists, call
for service.