When your battery starts to get low, the boat's power system
will start to stutter the motor in long even bursts. This is
intentional and used as a warning that you need to complete
your run. Bring the boat in as soon as you can.
Unplug the battery after every use and never allow the
battery to remain plugged into the boat for extended
periods of time.
Remove the drain plug from the back of the boat and allow
any water that might have entered to escape, making sure to
re-install the plug before you operate the boat again.
OPERATION NOTES
SAFETY FIRST, NEVER SWIM FOR A STALLED BOAT!
Even if you are a good swimmer please do not swim for a
stalled boat. Your boat has fl otation in it and WILL NOT SINK.
Please use other means to retrieve your boat or wait for it to
blow to shore.
Operation of your boat on a hard surface like concrete, black
top and ice, can permanently damage the bottom of the boat.
Never operate your boat on any hard surfaces.
High winds can overpower your Cajun Commander and might
cause you to lose control of the boat or tip the boat over. Keep
this in mind as you operate your model.
If the propeller is broken or chipped in any way do not use it.
Replace it before you operate the boat again.
Although this boat has a smooth bottom and is capable of
skimming over semi submerged obstacles, it is good to note
that the boat could become stuck on that debris so be careful
as you run your boat.
After you are done running your boat for the day, unplug the
battery and remove it from the boat. Leave the cover off the
radio compartment overnight to allow any moisture to evaporate.
Operating your boat at low or partial throttle settings for
extended periods of time can overheat and damage the
motor controller.
If your Cajun Commander should happen to stall, water
currents will slowly carry it to shore. The bad news is that the
boat could be carried to the opposite shore. When surveying
areas to run your model, keep variables in mind such as
wind direction, size of the lake, etc. It is not advisable to
run R/C boats on any free-fl owing bodies of water such as
creeks or rivers.
Make sure to follow your battery care information closely for
best battery life and performance.
TROUBLESHOOTING
When you plug the battery into the boat the boat
does not chime.
● Make sure you are using a charged battery.
● Check that the servo reversing switch is in the "R" position
and the throttle trim knob centered. (page 2 of your
transmitter manual)
© 2015 AquaCraft Models, a Hobbico company.
4 4
4
The motor starts stutter bumping at the start of
the run.
● Make sure the battery is charged.
● Make sure your battery is not too old or past its life cycle.
The boat does not seem to have as much power
as it had when it was new.
● Make sure to use a new or freshly charged battery.
● Make sure the prop is on the correct way (curved face
forward).
My radio does not talk to my boat.
● Follow the radio linking procedure in the radio manual
(page 2).
Website product information related to this product:
www.aquacraftmodels.com
www.tacticrc.com
www.duratrax.com
www.greatplanes.com
Enjoy customizing? Go to AquaCraft Models and check out
the downloadable fi les for 3D printing. Files are in .SAT format
and free to download.
From your design team at AquaCraft Models,
ENJOY!
MAINTENANCE
● To clean your boat, use a soft cloth and window cleaner.
● Remove the drain plug from the back of the boat and
allow any moisture that might have entered to evaporate.
Make sure to install the plug before the next time you
use the boat.
● Oil the motor bearings from time to time using light
machine oil.
● Store your boat on a fl at surface to avoid warping the hull.
Long storage times on uneven surfaces can damage
the hull.
REPLACEMENT PARTS
AQUB7917
Brushless Motor Mount
3-blade Prop 9 7 Tractor
AQUB6105
AQUB6273
Prop Adapter
AQUB6404
Scale Engine Accessories
AQUB8674
Air Rudders with Ball Studs
AQUB8618
Radio Box Cover with Seats
AQUB7807
LED Light Set
AQUB6334
Decal Sheet
AQUB6500
Engine Mounts
AQUM7000 50-amp Marine Controller
AQUB8728
Rudder Brackets
AQUB6275
Airboat Prop Cage
AQUB9506
Drain Plug
AQUB9503
Push Rod Seals
AQUB5722
Need help?
Do you have a question about the Cajun Commander and is the answer not in the manual?