Listening To Music With Connected Components; Playing Back The Music Of Connected Components - Sony MAP-S1 Operating Instructions Manual

Listening to music with connected
components
Playing back the
music of connected
components
You can listen to a track of connected
components through external output
connected to the unit.
Note
 Beforehand, press the VOLUME – to turn down
the volume.
1
Press FUNCTION to select "LINE
IN."
2
Connect its audio connecting
cord to the LINE IN (external
input) jack on the rear of the unit
and the output terminal of the
optional external equipment.
3
Start playback of the connected
component.
Adjust the volume on the connected
component during playback.
4
Press VOLUME +/– on the remote
to adjust the volume.
Note
 The system may enter Standby mode
automatically if the volume level of the
connected component is too low. For details, see
"Setting the Automatic Standby function"
(page 30).
19 GB