Table of Contents
Advertisement
Additional information
Setting the
Automatic Standby
function
The system enters Standby mode
automatically in about 15 minutes when
there is no operation or audio signal output
(Automatic Standby function).
By default, the Automatic Standby function
is turned on.
1
Press MENU.
2
Press / to select "Standby
Mode Menu," then press ENTER.
3
Press / to select "Auto
Standby," then press ENTER.
4
Press / to select "On" or "Off,"
then press ENTER.
Tip
2 minutes before entering Standby mode, "Auto
Standby" displays in the display window.
Note
The Automatic Standby function is invalid for the
tuner function (FM/AM/DAB), even when you
have enabled it.
The system may not enter Standby mode
automatically in the following cases:
while using the FM, AM or DAB function.
while an audio signal is being detected
during playback of audio tracks or files
while the Play Timer or Sleep Timer is being
used
The system counts down the time (about
15 minutes) again until it enters Standby mode,
even when Automatic Standby function is
enabled in the following cases:
30
GB
when a USB device is connected in USB
function
when a button on the remote or unit is
pressed
Hide quick links:
Advertisement
Table of Contents
