Bow Thruster (Optional) - Sea Ray 44 Sedan Bridge Owner's Manual

19. B T
OW HRUSTER
The bow thruster is electrically driven and gives
the operator more maneuverability of the bow when
docking or maneuvering the vessel in narrow
channels or where space is at a premium.
T O B T
O PERATE THE OW
• Activate the bow thruster by turning the 24V
BOW THRUSTER switch ON. The switch is
located on the control station switch panel.
B T S
OW HRUSTER WITCH
(F . 3.20.1)
IG
PORT IGN
STOP START/RUN
BILGE PUMPS
FWD AFT
RUNNING ANCHOR
• By manipulating the the joy stick also located
on the control station the operator is able to
move the bow slowly to port and starboard.
The bow thruster motor is equipped with an internal
thermally activated breaker. The thermal breaker
protects the motor from overheating. When the
thermal breaker is activated the thruster motor will
not operate and must be allowed to cool down for
normal operation.
REFER TO OWNER'S MANUAL PACKET FOR
INSTRUCTIONS AND WARRANTY INFORMATION.
3.20
S 3 • U
ECTION
(O )
PTIONAL
HRUSTER
EMERG STBD IGN ENGINE BILGE
START/RUN STOP
START SYNC BLOWERS HORN
THRUSTER PLATFORM WINDLASS
MAIN 24V MAIN MAIN CONTROL ACCY ACCY
LIGHTS
WIPERS WINDSHIELD
DIMMER SPOTLIGHT ON/OFF/INT LOW/MED/HI WASHER ACCY
Y B
SING OUR
B T O
OW HRUSTER PERATION
(F . 3.20.2)
IG
THRUST
44 Sedan Bridge (455 Sedan Bridge)
OAT
BOW
THRUSTER TOGGLE
CONTROL
(SEE FIGURE 2.8.2)
BOW
DIRECTION
THRUST