Installing Your Modem Driver; Verifying Your Modem - Atlantis Land A01-PU3 Quick Start Manual

Hide thumbs Also See for A01-PU3:

Table of Contents

Available languages

7. Installing Your Modem Driver

Please following next steps to install driver/utility:

Insert the CD-ROM and the Auto-run program will appear. Alternatively,

open a file browser and double click on the autorun.exe file located in the

CD directory. In some specific setting on Windows system, you may need

to proceed the software manually, go to your Windows Start menu and

choose Run, type "D:\A01-PU3\Driver\<OSVer>\SETUP.EXE" in the

dialog box and click OK.

Click on "A01-PU3" icon to select WebRunner USB.

Select the current OS that you are using on th PC. Follow the install wizard

instructions to complete the installation.



From your Windows desktop, right-click on My Computer icon and

click Properties.



Click on the Hardware tab and then click Device Manager.



Double-click on the Modem device. You should see the Conexant

UCM92 Data Fax RTAM USB Modem is being listed. This means that

your modem driver is successfully installed. If you see a yellow

D:\ will depends on where the CD-ROM drive is located and

<Windows OS> will depend on the Windows OS you are using.

If you need to install the driver manually, refer each Windows

OS to the following CD-Rom directory path: D:\A01-

PU3\Driver\<Windows OS>.

D:\ will depends on where the CD-ROM drive is located and

<Windows OS> will depend on the Windows OS you are using.

Table of Contents