Power Management Setup - DFI CA34-SC User Manual

3.1.5 Power Management Setup

The Power Management Setup allows you to configure your system
to most effectively save energy.
ACPI Function
u Power Management
ACPI Suspend Type
PM Control by APM
Video Off Option
Video Off Method
MODEM Use IRQ
Soft-Off By PWRBTN
PWR Lost Resume State
u
Wake Up Events
↑↓→← Move
The settings on the screen are for reference only. Your version may not be
identical to this one.
ACPI Function
This function should be enabled only in operating systems that
support ACPI. Currently, only Windows
function. When enabled, the system will ignore the settings in “Power
Management”. If you want to use the Suspend to RAM function,
make sure this field is enabled then select “S3(STR)” in the “ACPI
Suspend Type” field.
Power Management
Move the cursor to this field and press <Enter>. The “Power
Management”, “HDD Power Down”, “Doze Mode” and “Suspend
Mode” fields will appear.
Power Management
This field allows you to select the type (or degree) of power
saving by changing the length of idle time that elapses before the
“HDD Power Down”, “Doze Mode” and “Suspend Mode” fields
are activated.
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Power Management Setup
Enabled
Press Enter
S1(POS)
Yes
Suspend -> Off
V/H SYNC+Blank
3
Instant-off
Keep Off
Press Enter
Enter:Select +/-/PU/PD:Value
F5:Previous Values F6:Fail-Safe Defaults
Award BIOS Setup Utility
Item Help
Menu Level
F10:Save ESC:Exit F1:General Help
F7:Optimized Defaults
98/2000 supports this
®
3
61