DFI CA34-SC User Manual page 19

Table of Contents

Advertisement

Important:
• The frequency ratio of some processors shown in the table
may have been locked by the manufacturer. If you are using
this kind of processor, setting an extended ratio for the
processor will have no effect. The system will instead use its
factor y default ratio.
• The frequency ratio of processors greater than 8x has been
locked by the manufacturer and will no longer have the
flexibility of using extended ratios. Therefore, the system will
use the processor’s factor y default ratio.
• At the time this document was printed, the CPUs marked
with asterisk (
) are not yet available. They are included in
*
the table for reference only.
• The processors supported by the system board support
VID (Voltage Identification). The switching voltage regulator
on the system board will automatically set the voltage
regulator according to the voltage of the processor.
Hardware Installation
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ca34-su

Table of Contents