Brother HL-5440D Product Safety Manual page 15

T h i s equipment h a s been tested and found to comply with the limits for a C l a s s B digital device,
pursuant to Part 15 of the F C C R u l e s . T h e s e limits a r e designed to provide reasonable protection
against harmful Inferference In a residential installation. T h i s equipment generates, u s e s , and c a n
radiate radio frequency energy and, if not installed and used In a c c o r d a n c e with the instructions,
may c a u s e harmful Interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does c a u s e harmful
interference to radio or television reception, which c a n be determined by turning the equipment
off and on, the u s e r is encouraged to try to correct the interference by one or more of the following
m e a s u r e s : . „ , . „ ^,
• Reorient or relocate the receiving a n t e n n a . .
• I n c r e a s e the separation between the equipment and receiver. ' •' •
• Connect the equipment into an outlet on a circuit different from that to which the receiver Is
connected.
• Call the dealer or an e x p e r i e n c e d radio/TV technician for help. . iVjjV'. j
• { W i r e l e s s network models only)
T h i s transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
O I m p o r t a n t
• C h a n g e s or modifications not e x p r e s s l y approved by Brother Industries, Ltd. could void the
user's authority to operate the equipment.
• A shielded interface cable should be used to e n s u r e compliance with the limits for a C l a s s B
digital device.