Toa HX-7B Operating Instructions Manual page 18

Model No.
Enclosure
Power Handling
Capacity
Rated Impedance
Sensitivity
Frequency Response
Crossover Frequency
Directivity Angle
Speaker Component
Input Terminal
Water Protection
Finish Enclosure
Punched net
Dimensions
Weight
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Terminal cover ........................................... 1
Tapping screw 4 x 12 ................................. 4
Rubber gasket ........................................... 1
• Optional products
[HX-7B]
Matching transformer:
Matching transformer adapter: HY-MT7
Speaker mounting bracket:
[HX-7W]
Matching transformer:
Matching transformer adapter: HY-MT7
Speaker mounting bracket:
* HY-MT7 Matching Transformer Adapter is separately required.
18
HX-7B-WP
Continuous pink noise: 250 W (IEC60268-5: 350 W)
Continuous program:
Horizontal: 100º
Vertical
Low frequency : 13 cm (5.5") cone-type x 8
High frequency: Wave front control horn with compression driver x 4
M4 screw terminal (suplied with the terminal cover),
distance between barriers: 9 mm (0.35")
IPX4 (Install with every speaker module tilted downward from the horizontal.)
Polypropylene, black
Surface-treated steel plate, black,
rust proof coating
497 (w) x 664 (h) x 274 (d) mm (19.57" x 26.14" x 10.79")
MT-200*
HY-60DB-WP, HY-CN7B-WP, HY-TM7B-WP, HY-MS7B-WP
MT-200*
HY-60DW-WP, HY-CN7W-WP, HY-TM7W-WP, HY-MS7W-WP
Sealed type
750 W
8 Ω
100 dB (1 W, 1 m)
105 Hz – 20 kHz
1.7 kHz
: Depending on directivity angle mode
Surface-treated steel plate, white,
rust proof coating
30 kg (66.14 lb)
HX-7W-WP
Polypropylene, white