Main Electrical Components Specification - Vento Phantom R4i Service Maintenance Manual

MAIN ELECTRICAL COMPONENTS SPECIFICATION

SOME IMPORTANT SPECIFICATION-ELECTRICAL
BATTERY
SYSTEM
Capacity
Specific gravity at (27 )
Battery
Charging current
Charging time
Capacity
Battery
Battery charging coil resistance
charger
at (20 /68°f)
Lamp cable
VOLTAGE REGULATOR OUTPUT:
Regulated voltage for lighting circuit
Rectified DC voltage for battery charging > 11.5 Volt
Rectified DC voltage for battery charging 0.6 to 2.0 Amp at 5000 RPM
VENTO MOTORCYCLES
CHARGING
ITEM
Fully charged
Needs charging
Black and Black-White wiring Less than 2 Ohms
Yellow and Green-White
<14.5Volt
Rev no.01/ page 77of 84
SPECIFICATION
12Volt-6Ah/YTX7A-BS/YUASA
0.6 Amp
8-12 hours
114W at 5000rpm
Between
Less than 2 Ohms
1.220~1.240
Below 1.220