Engine Disassembly And Assembly - Vento Phantom R4i Service Maintenance Manual

ENGINE DISASSEMBLY AND ASSEMBLY

DISASSEMBLY
Guide-fan cover/ fan cover/carburetor
Left crankcase cover/gasket
Outside part of left crankcase
motor
Chain adjustor /cylinder head cover
transmission gear
Camshaft holder/cam
Cylinder cover/gasket/pin
Cylinder/gasket/pin
Spring clip/piston pin/piston
Cooling Fan /flywheel/ Stator coil
Right crankcase cover/oil filter/oil gauge
Right crankcase outside
Start motor/left and right crankcase/crank
Gearbox
Left crankcase/gearbox cover
NOTE:
Before installation, wash engine parts, and lubricate, refer to recommended torque value for tightening
•
fasteners.
VENTO MOTORCYCLES
Pay special attention to single direction fixing accessories.
•
Start and inspect oil circulation /lubrication system after assembly the engine.
•
Left crankcase assy./gearbox assy.
Crankshaft/left and right crank case/Starter
Oil pump/starter-clutch/electric start
Right crankcase cover/oil filter/oil gauge
Stator coil/flywheel/cooling fan
Piston/piston pin/circlip
cylinder/gasket/ dowel pin
Left crankcase outside assy.
Left crankcase cover/gasket/ dowel pin
Guide fan cover/fan cover/carburetor
Rev no.01/ page 26of 84
ASSEMBLY
gearbox
cylinder cover/gasket/ dowel pin
Cam/camshaft holder
Chain adjustor/cylinder head cover