Electrical Starting Power Flow Chart; Circuit Process - Vento Phantom R4i Service Maintenance Manual

NOTE 1
Incase charging output is less than 0.6 Amp or more than 2.0Amp then replace the Voltage Regulator with new one
and recheck.
NOTE 2
AMMETER: -----Series connection inline with positive battery wire to measure DC –Amp.
VOLTMETER: ---Parallel connection between positive & negative terminal of the battery to measure DC-Volts.
VENTO MOTORCYCLES

Electrical starting power flow chart

Circuit process

Storage battery
Fuse
Main switch Alarm System
Stop switch
Start switch
Start relay
Start motor
Connect ground
Rev no.01/ page 72of 84
magnet motor