Head Light Indicator & Meter Light; Head Light Disassembly - Vento Phantom R4i Service Maintenance Manual

HEAD LIGHT INDICATOR & METER LIGHT

HEAD LIGHT DISASSEMBLY

Remove front cover
Headlight
Leg shied
Remove headlight bulb-12V 18W/18W×2 by unscrewing fixing screw
adjust focus through adjusting nut
remove and install night small light-12V 3 W×2
HEAD LIGHT ASSEMBLY
The assembly sequence is the reverse of disassembly.
INDICATOR BULB
Remove Indicator
Remove and replace bulb-12V10 W
SPEEDOMETER DISASSEMBLY
Remove front cover of handlebar
Remove connector of headlight
Take out flasher from its retainer and remove connector
Remove fixing screw
Front board, back board
Remove rotating meter and the core of odometer
Replace bulb including high beam, turning signal light, fuel gauge, meter indicator light
VENTO MOTORCYCLES
SPEEDOMETER ASSEMBLY
The assembly sequence is the reverse of disassembly.
Rev no.01/ page 75of 84