Kick Shaft Assembly; Transmission Gear Shaft Assembly - Vento Phantom R4i Service Maintenance Manual

KICK SHAFT ASSEMBLY

REMOVAL
Kick start shaft assy.
Bush 6
Bush 1
Gasket 2
Spring 3
Pin 5
Kick start shaft 4
INSTALLATION
The installation sequence is the reverse of
removal.
NOTICE
Daub bush 1 with proper lubrication to
•
install it.
Daub shaft end with proper lubrication
•
to install bush 6 .
Be sure to install pin proper tightly.
•
VENTO MOTORCYCLES

TRANSMISSION GEAR SHAFT ASSEMBLY

Transition gear shaft assy.
Adjustment gasket 4
Transition gear assy. 3
Transition gear shaft 1
Installation The installation sequence is the reverse of remo
Notice:
Before installing transition gear, install clip (5) in
•
transmission gear groove.
Transmission gear can turn back well.
•
Rev no.01/ page 39of 84
REMOVAL
Fixing pin 6
including 5
Tension spring 2
Clip 5