Advertisement
Quick Links
Features
•
Color/B&W scan selection
•
300/600 dpi scan selection
•
Direct save JPEG/PDF file to microSD card
•
Support microSD card up to 32 GB
•
View photos in iPad
Package Contents
Portable scanner
Note:
1.
One end of the supplied USB Y cable includes two USB connectors. These two connectors (one
labeled "Power Cable", the other labeled "Data Cable") are used to connect to your
computer at the same time to increase the transferring speed. However, if only one USB port
is available from your computer, please plug the connector labeled "Power Cable" to your
computer while charging the battery and plug the connector labeled "Data Cable" to your
computer while downloading the images.
2.
Use the supplied USB Y cable only to this scanner. Using this USB Y cable to other devices may
cause your computer to malfunction.
Understand the LCD Screen and Button Functions.
Install the Battery
1.
Push and remove the battery cover on the
scanner.
2.
Load the battery into the battery container.
Make sure the battery is loaded with the
correct polarity. Note the copper strips on the
battery should be touching the copper strips
on the device inside the battery container.
3.
Insert the battery cover.
Handy Scanner-Quick Start Guide
1
Ready LED
2
SD card indicator
3
Effect indicator
4
Battery indicator
5
Resolution selector
6
Power/Scan button
7
Error LED
8
Resolution indicator
9
Counting indicator
10
File format indicator
11
File format selector
12
Color selector
1
USB Y Cable
Software CD
Show ready status or scan in progress
Pictures will be stored in micro SD card
Photo(Color) or BW(Black and White)
Battery is full，
Press to choose STD(standard) or HQ
(high quality) resolution
Hold 2 seconds to power on/press to start
scan and end scan.
A red flashing LED indicates error
conditions such as scanning too fast
STD(300dpi) or HQ(600 dpi)
Show scan count
JPEG or PDF
Press to choose JPEG or PDF
Press to choose Color or Black and white
Accessories:
• Cleaning Cloth
• Pouch
• Rechargeable
Li-Ion battery
(CNP50)
• Calibration Sheet
Empty battery
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Avision IS17
Summary of Contents for Avision IS17
-
Page 1: Package Contents
Handy Scanner-Quick Start Guide Features • Color/B&W scan selection • 300/600 dpi scan selection • Direct save JPEG/PDF file to microSD card • Support microSD card up to 32 GB • View photos in iPad Package Contents Accessories: • Cleaning Cloth •... -
Page 2: Charge The Battery
Charge the battery Before using the scanner, you need to first charge the battery by connecting the scanner to your computer with a USB Y cable. (Connect the mini USB connector to the scanner while connecting the two USB connectors to your computer.) During the charging process, the red LED is on. -
Page 3: Specifications
Scan your documents. Place your document on a flat surface. If you are scanning a book, hold the book firmly with one hand. Place the scanner horizontally on the start-scanning position marked by white lines on four sides of the scanner. Press the “Scan”... -
Page 4: Troubleshooting
Troubleshooting If there is error during scanning, the error LED will be flashed in red and error codes will be displayed. Refer the following table to clear the error conditions. Error Problem/Cause Solution Press the Scan button to restore and rescan in a lower Scanning speed is too fast.
Need help?
Do you have a question about the IS17 and is the answer not in the manual?
Questions and answers