Charging The Battery - Nokia 9300 User Manual

file:///C:/USERS/MODEServer/chari/4693500/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml file:///C:/USERS/MODEServer/chari/4693500/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml
3. Note: Before you use an existing compatible
memory card with your Nokia 9300, you must
convert the memory card with Data mover and
reinstall the applications that you previously
installed to the memory card. However, do not
reinstall any pre-installed applications for the Nokia
9210 Communicator. Your Nokia 9300 contains a
later version of these applications, and these later
versions must be used with Nokia 9300.
Slide the memory card into the memory card slot (2).
Make sure that the beveled corner of the memory
card is pointing towards the SIM card slot and the
contact area is facing downwards. Note that the
back cover must be in place for the device to
recognize the memory card.
4. Note: Do not remove the MMC card in the
middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well as
the device, and data stored on the card may be
corrupted.
You can remove a memory card after you have
removed the back cover even when the battery is
inserted.
5. Insert the battery. Align the contacts of the battery
with the corresponding connectors on the battery
compartment.
6. Insert the locking catches of the back cover into the
corresponding slots, and slide the cover into place.

Charging the battery

1. Connect the charger to an AC wall outlet.
Cyan Cyan Cyan Cyan Magenta Magenta Magenta Magenta Yellow Yellow Yellow Yellow Black Black Black Black
Page 11 Page 11 Nov 23, 2004 11:49:43 AM Nov 23, 2004 11:49:43 AM
11