Table of Contents
Advertisement
13. USING THE ALARM
The alarm function uses a 24-hour clock. Once the alarm has been set, the alarm
sounds for 15 seconds when the set time is reached once a day. The time at which
the alarm sounds applies to the time (TME) mode, and cannot be set based on the
local time (L-TM).
3. Click (turn) the crown to set the alarm time.
(1) Clicking once to the right causes the hour and minute hands to move
clockwise.
(2) Clicking once to the left causes the hour and minute hands to move counter-
clockwise.
•
Turning the crown rapidly (continuously clicking two or more times) causes
the hands to advance rapidly. When stopping the hands click the crown once
to the right or left. When the hands are not stopped manually, they stop
automatically after being corrected by 12 hours.
•
Set the alarm while making sure not to mistake AM and PM by referring to
the 24 hour hand.
4. Return the crown to the normal position after setting the alarm time.
[Switching alarm ON and OFF]
The alarm is switched ON and OFF each time button (A) is pressed when the crown
is pulled out to Position 1 or Position 2 in the alarm mode.
[Alarm Tone Monitor]
When button (A) is pressed with the crown in the normal position in the alarm
mode, the alarm tone sounds for as long as button (A) is pressed.
[Stopping the Alarm Tone]
Press either button (A) or (B) to stop the alarm tone while it is sounding.
Return to Table of Contents
[Setting the Alarm Time]
1. Turn the crown and set the mode hand to the
alarm [ALM] mode.
•
Second hand: Moves rapidly to the ON or
OFF position.
•
24-hour hand, hour hand, and minute
hand: Move the previously set alarm
time.
•
Function hand: Stops at the 0 position.
2.
Pull out the crown to Position 2 (alarm
setting position).
•
The alarm setting is turned ON
automatically.
Return to Table of Contents
Hide quick links:
Advertisement
Table of Contents
