Finishing; Safety Screen Removal / Installation - Napoleon HD81NT Installation And Operating Instructions Manual

6.0 FINISHING

THE FRONT OF THE APPLIANCE MUST BE FINISHED WITH ANY NON-COMBUSTIBLE MATERIALS
SUCH AS BRICK, MARBLE, GRANITE, ETC., PROVIDED THAT THESE MATERIALS DO NOT GO
DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS
FACING AND/OR FINISHING MATERIAL MUST NEVER OVERHANG INTO THE APPLIANCE OPENING.
THE GLASS DOOR ASSEMBLY IS DESIGNED TO PIVOT FORWARD WHEN RELIEVING EXCESS
PRESSURE THAT MIGHT OCCUR. FINISHING OR OTHER MATERIALS MUST NOT BE LOCATED IN
THE OPENING SURROUNDING THE DOOR AS THIS WILL INTERFERE WITH THE DOORS ABILITY TO
6.1

SAFETY SCREEN REMOVAL / INSTALLATION

A barrier designed to reduce the risk of burns from the hot viewing glass is provided with the
appliance and shall be installed.
Lift the trim with safety screen off the 4 shoulder screws, pull trim forward and up to remove from the
appliance.
Reverse these steps to re-install the trim with safety screen. Ensure the safety screen is installed correctly.
NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.
BELOW THE SPECIFIED DIMENSION AS ILLUSTRATED.
REMOVED, CRACKED, BROKEN OR SCRATCHED.
RELIEVE THE PRESSURE.
WARNING
!
RISK OF FIRE!
31
72.6
W415-1406 / 11.19.14
EN