Ac Circuit Breaker - PowerLand PD3G4400E Owner's Manual

Auto Throttle System
The auto throttle system automatically reduces engine speed when all loads (i.e.: tools and
appliances) are turned off or disconnected. When loads are turned on or reconnected, the
engine returns to the rated speed.
Switch Position
ON: Recommended to minimize fuel consumption and further reduce noise levels when no
load is applied to the generator. The auto throttle system does not operate.
OFF: Recommended to minimize warm-up time when the generator is started and starting load
with large start-up power equipments.
*NOTICE: If connect to a residence, it is recommended that the auto throttle be kept in the
"ON" position if less than 50% load is being used. If the generator will be running over
50% it is recommended that you switch to the "OFF" position.

AC Circuit Breaker

The circuit breaker must be in the "ON" position in order to start running a load, but it will
automatically switch "OFF" if there is a short circuit or a significant overload of the generator at
the receptacle. If the circuit breaker is switched OFF automatically, check that the appliance is
working properly and does not exceed the rated load capacity of the circuit before switching the
circuit breaker ON again.
*The circuit breaker may be used to switch the generator power ON or OFF.
PD3G4400E
AC CIRCUIT BREAKER
AUTO THROTTLE SWITCH
PD3G10000E
ON
OFF
7
ON
OFF