Before using the ground
terminal, consult a qualified
electrician,
inspector or local agency
having jurisdiction for local
codes or ordinances that
apply to the intended use of
the generator.
DC Terminals
The DC terminals may ONLY
be used for charging 12 volt automotive type batteries.
The terminals are colored, red will identify the positive (+) terminal and black will identify the
negative (-) terminal. The battery must be connected to the generator DC terminals with the
proper polarity (battery positive must be connected to the generator red terminal and battery
negative must be connected to the generator black terminal).
DC CIRCUIT
PROTECTOR
NEGATIVE TERMINAL
(BLACK)
DC Circuit Protector
The DC circuit protector automatically shuts off the DC battery charging circuit when the DC
charging circuit is overloaded, when there is a problem with the battery, or when the connections
between the battery and the generator are improper.
Oil Alert System
The Oil Alert System is designed to prevent engine damage caused by an insufficient of oil in
the crankcase. Before the oil level in the crankcase can fall below a safety limit, the oil alert
system will automatically stop the engine (the engine switch will remain in the ON position). If
the engine stops and will not restart, check the engine oil level before troubleshooting in other
areas.
electrical
VOLTAGE SELECTOR SWITCH
ON
OFF
POSITIVE TERMINAL
(RED)
120/240V
120V ONLY
DC CIRCUIT
PROTECTOR
NEGATIVE TERMINAL
(BLACK)
6
120V ONLY
GROUND TERMINAL
POSITIVE TERMINAL
(RED)
120/240V
ON
OFF