Bodily Injury Warnings - Xerox Phaser 3150 Service Manual

Precautions

1.2.5 Bodily Injury Warnings

1. Use caution around high temperature parts.
The fuser unit works at a high temperature. Use caution when working on the printer. Wait for the fuser to cool
down before disassembly.
2. Use caution when around rotating parts.
When operating the printer, do not put your hands into the rotating parts (Paper feeding entrance, motor, fan,
etc.). Remove jewelry and loose clothing before servicing the printer.
3.
When you moving the printer.
This printer weighs 12.7 kg including the toner cartridge and tray. Use safe lifting and handling techniques. Use
the lifting handles located on each side of the printer. Back injury could result if you do not lift the printer
properly.
4. Ensure the printer is installed properly.
Ensure the printer is installed on a flat, level surface, capable of supporting its weight. Failure to do so could
cause the printer to tip or fall possibly causing personal injury or damaging the printer.
Do not install the printer on a sloping or unstable surface. After installation, double check that the printer is
stable.
1-4