2.4
Installing the Trunk Cards
LCOT4 Card
To trunk
Accessory (included): Extension Bolt × 1, Strap × 1
User-supplied (not included): RJ45 connector or RJ11 connector*
* The connector type may be RJ45 or RJ11 depending on the country/area.
BRI2 Card
RJ45 (LINE 1)
RJ45 (LINE 2)
To NT1
Accessory (included): Extension Bolt × 1, Strap × 1
User-supplied (not included): RJ45 connector
Notes
•
Connect this optional service card to the trunk through an NT1; do not connect to the
U interface of the trunk directly.
•
This optional service card has 100
point connection, the card must be placed at the end of the bus.
RJ45
of terminal resistance. For use in point to multi-
Getting Started
9