Whirlpool 920 Series Use And Care Manual page 20

Disconnecting the dishwasher
1. Turn hot water off. (This can be done
after the last rinse.)
2. Press the red button on the connector to
release the water pressure.
3. Lift slightly on the hose connector while
pulling down the locking collar. Pull down
on the connector.
4. Empty any remaining water from the
connector by turning the connector
upside down.
5. Unplug power supply cord and return to
storage compartment.
6. Return hoses to storage compartment.
Hose connector
Converting a portable dishwasher
to a built-in
Your WHIRLPOOL@ Portable Dishwasher The kit is available at your Whirlpool dealer
can be converted to a built-in (undercounter) or authorized Whirlpool service company.
model by using conversion kit No. 4317856. Instructions are included with the kit.
20