Iridium Pilot User Manual page 57

• Once the test is stopped, click on File -> SaveAs to create a .csv file of the data. This output .csv file can then
be analyzed and interpreted by Iridium.
• The survey will record the max and mean for the received signal strength indicator (RSSI) that it "hears. " It will
do this on each channel across all 7 antenna elements.
• Spikes in the resulting graph indicate channels unavailable to Iridium Pilot due to other sources transmitting
on them. The more spikes, the more RF interference present.
Access Denied
Denial of access will be indicated by the voice and data LEDs on the BDE illuminating Amber. Access to the
Iridium network may be denied for a number of reasons. The following items contain information that you may
be asked to provide when contacting your service provider.
Reason
TMSI invalid
IMSI invalid
Authentication Failure
IMEI Blacklisted
Indeterminable Location
Restricted Area
Antenna Utility (Available in versions AO12001 and higher)
The Antenna utility allows you to effectively troubleshoot and identify antenna shadowing or interference
problems.
The Antenna utility requires Admin login. You must login as Admin from the Diagnostics page of the IBSU GUI
in order to see the Antenna array (see Figure 3.6).
Suggested Action
Unit will automatically try to access the network
using the IMSI.
Call service provider.
Check SIM status on Status web page, check using a
valid SIM card. If all ok call service provider.
Call service provider
Check GPS LED on BDE. If LED is green, check GPS
status on web page. Contact Service Provider with
this information and denial information.
Wait until move into different geographical area
Iridium Pilot User Manual
53