Iridium Pilot User Manual page 40

eLeMeNT
Localization
Whitelist_Address_X
Note: Configured white list addresses must be in a contiguous block starting with rule 1, otherwise
unexpected behaviour may occur. For example configuring addresses 1,2,3,4 would be fine, but configuring
1,2,8,9 would be wrong as would configuring rules 5,6,7.
Whitelist_Enable
Whitelist_Size
Note: The size configured here must match the number of Whitelist_Address_X entries in the configuration
file otherwise unexpected behaviour may occur.
Compression_Mask
Firmware_Notification
36
Iridium Pilot User Manual
DeSCRIPTION
Configures the localisation setting of the
ISU, takes an enumeration with one of the
following possible values:
"USA, Canada"
"UK, Ireland"
"Germany, France, Italy"
"Spain, Portugal"
China
Japan
Configures one of the 12 white listed IP
addresses, takes an IP address.
Enables or disables the use of the IP
address white list, takes and enumeration
of the format "enabled" or "disabled" as
input.
Configures the number of configured
white listed IP addresses, takes an integer.
Enables IP header compression, data
compression and the Performance
Enhancing Proxy (PEP), takes an integer.
This is a bit mask of the services to enable:
0x01 – IP header compression enabled
0x02 – ZLIB data compression enabled
0x04 – PEP enabled
Enables or disables the new firmware
available notification on the ISU's
diagnostics web page, , takes and
enumeration of the format "enabled" or
"disabled" as input.
exAMPLe
Localisation "Germany, France, Italy"
Whitelist_Address_1 123.456.789.123
Whitelist_Enable disabled
Whitelist_Size 4
Firmware_Notification enabled