Iridium Pilot User Manual page 39

3.8.2 Element Definitions
Below is a description of the valid element IDs and the format expected for their associated
configuration value.
eLeMeNT
Admin_Password
IP_Address
Subnet_Mask
DHCPS_Enabled
DHCPS_IP_Start
DHCPS_IP_End
DNS_Enabled
Port_Forward_Rule_X
NOTE: Configured port forwarding rules must be in a contiguous block starting with rule 1, otherwise
unexpected behaviour may occur. For example configuring rules 1,2,3,4 would be fine, but configuring
1,2,8,9 would be wrong as would configuring rules 5,6,7.
DeSCRIPTION
Configures the administrator's password
for the ISU, takes a string as input.
Configures the IP address of the ISU, takes
an IP address as input
Configures the subnet mask of the ISU,
takes an IP address as input.
Enables or disables the DHCP server
functionality of the ISU, takes and
enumeration of the format "enabled" or
"disabled" as input.
Configures the start of the IP address
range DHCP will allocate addresses from if
enabled, takes an IP address as input.
Configures the end of the IP address
range DHCP will allocate addresses from if
enabled, takes an IP address as input.
Enables or disables the DNS forwarding
functionality of the ISU, takes and
enumeration of the format "enabled" or
"disabled" as input.
Configures one of the 15 port forwarding
rules on an ISU, takes a record of the
following format:
• IP address
• Internal port number
• External port number
• Protocol (enumeration "UDP" or "TCP")
• In use (enumeration "yes" or "no")
exAMPLe
Admin_Password password
IP_Address 192.168.0.1
DHCPS_Enabled disabled
DHCPS_IP_Start 192.168.0.2
DHCPS_IP_End 192.168.0.10
DNS_Enabled enabled
Port_Forward_Rule_1 192.168.0.5 55
66 TCP yes
Iridium Pilot User Manual
35