Advertisement
(5) Remove the paper feeding motor assembly. (2.5mm screw x 2)
·When removing it, only take out the two screws shown in the figure so that the motor heat sinker and
HP sensor board assembly come out together.
(6) Remove the timing belt motor assembly. (2.5mm screw x 2)
-......
Belt motor heat sink
94VF303026010
~
'-....._~
Paper feeding motor assembly
94VF303031000
·
~
(7) Remove the timing belt motor assembly from the timing belt motor heat sink.
(8) Remove the PTS sensor board assembly.
(9) Remove the belt driving pulley ( E ring).
• When removing the belt driviog
pulley;
frrst loosen the timing belt. (Refer to page 34)
(1 0) Remove the ball bearing from the belt driving pulley.
PTS sensor board
94 V F303029000
t
Timing belt motor assembly
94 VF303027000
Belt motor heat sink
94VF303026010
-
31-
Advertisement
