Setting Up Screen Call - Sanyo KATANA DLX User Manual

Setting Up Screen Call

This feature enables you to screen incoming calls by using a
recorded announcement, either one that is prerecorded or
one that you have recorded. You can also record the caller's
message into the Voice Data list.
Recorded caller's messages become ".uvo" file format data
Note
and can be played only when accessed in the Voice Data list.
Activating Screen Call
To start Screen Call when you have incoming calls:
When the phone rings or vibrates, select Options (right
softkey) > Screen Call.
To set Auto Screen Call:
1. Select Main Menu > Tools > Voice Memo > Screen Call >
Auto.
2. Select On.
3. Set the answer delay by using numeric keys or by
pressing the navigation key up or down.
4. Select OK (left softkey). (The
While the caller's message is being recorded, press TALK to
Tip
answer the call, or press END to stop recording and
disconnect the call.
Section 1H: Using Your Phone's Voice Services
icon is displayed.)
141