Adding A New Contacts Entry - Sanyo KATANA DLX User Manual

Adding a New Contacts Entry

Your phone can store up to 500 Contacts entries. Contacts can
store up to a total of 700 phone numbers, and each Contacts
entry's name can contain up to 32 characters.
To add a new entry:
1. Select Main Menu > Contacts > Find/Add Entry >
<Add Contact>.
2. Enter a name for the entry and press the navigation key
down. (See "Entering Text" on page 34.)
Enter the phone number in standby mode and press OK .
Shortcut
Proceed with steps 2-6 in "Saving a Phone Number" on
page 28.
3. Enter the phone number for the entry and press
4. Select a label for the entry (Mobile, Home, Work, Pager,
Fax, or Other) and press
5. Select Save (left softkey).
After you have saved the number, the new Contacts entry is
displayed. (See "Contacts Entry Options" on page 104.)
Tip ICE – In Case of Emergency
To make it easier for emergency personnel to identify
important contacts, you can list your local emergency
contacts under "ICE" in your phone's Contacts list. For
example, if your mother is your primary emergency
contact, list her as "ICE–Mom" in your Contacts list. To
list more than one emergency contact, use "ICE1–___,"
"ICE2–___," etc.
.
Section 1F: Using Contacts
.
100