Specifications - Makita BJS160 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Max. cutting capacities
Min. cutting radius
Strokes per minute (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately
environmentally compatible recycling
facility.
Intended use
The tool is intended for cutting sheet steel and stainless
sheet steel.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BJS100, BJS101, BJS161
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model
Steel up to 400 N/mm
Steel up to 600 N/mm
Aluminum up to 200 N/mm
-1
)
Overall length
Net weight
Rated voltage
of the
and returned
) : 71 dB (A)
pA
BJS160
2
1.6 mm (16 ga)
2
1.2 mm (18 ga)
2
2.5 mm (13 ga)
1.9 kg
D.C. 14.4 V
END004-6
Model BJS160
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration total value (tri-axial vector sum) determined
European
according to EN60745:
Model BJS100
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BJS101, BJS161
to an
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENE037-1
Model BJS160
Work mode : cutting sheet metal
Vibration emission (a
ENG905-1
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
2
BJS161 BJS100
250 mm
4,300
362 mm
2.0 kg
D.C. 18 V D.C. 14.4 V
) : 74 dB (A)
pA
Wear ear protection
) : 12.5 m/s
h
2
) : 13.0 m/s
h
2
) : 12.0 m/s
h
2
BJS101
1.0 mm (20 ga)
0.7 mm (23 ga)
2.5 mm (12 ga)
30 mm
4,300
364 mm
1.9 kg 2.0 kg
D.C. 18 V
ENG900-1
2
2
2
ENG901-1