Sony DVP-CX995V Service Manual page 6

DVP-CX995V
ALIGNMENT OF GEAR (CAM) PHASE WITH DOOR
ASS'Y
door assy
Align a slit of door assy with a marking on
the bottom land of gear tooth when the gear
is rotated fully in arrow direction, as shown.
NOTE FOR INSTALLATION
It takes care that the cables doesn't hang down.
cable
(AV board to PANEL-L board)
cable
(MB board to
LED board)
– Front side –
MB board
6
gear (cam)
AV board
MB board
cables
(MB board to
DRIVER board,
SENSOR board)
AV board
CLEANING OF OPTICAL PICK-UP
optical pick-up
Remove the pulley assy, and
clean the lens of optical pick-up
through this hole.
cables
MB board
(MB board to
DRIVER board,
SENSOR board)
locking wire
saddle
switching regulator
pulley assy
AV board
cables
(MB board to
DRIVER board,
SENSOR board)