Troubleshooting; Fault Checklist - Panasonic NA-140VS4 Operating Instructions & Installation Instructions

Problem
Buttons do not work.
Door does not open.
Unusual odour
No water going into
the appliance.
There is only a small
amount of water.
Water builds up
during the wash
process.
Water drains out
during the wash
process.
NA-140_148VS4_AUNZ_EN_20140213.indb
- The programme, temperature and process settings cannot
be changed while washing is in progress (the rinse and
spin settings can be changed).
- Child safety lock may be activated. (See page 23.)
- Door lock may be activated. (See page 9.)
- Child safety lock may be activated. (See page 23.)
- The water temperature or level may be too high.
- Rubber parts may give off a smell when you start using
the appliance, but the smell will go away over time.
You can wash the drum by running the 90 °C programme.
(See page 24.)
- The water tap may be turned off.
- The water supply hose may be frozen. (See page 26.)
- The water supply may be disrupted.
- The water supply filter may be clogged. (See page 26.)
- If you have paused the washing and then restart it, the
appliance may drain out some water.
Do NOT pour water in through the door.
- This is normal; water is automatically supplied if the
amount of water has decreased. For heavy loads, the
water may fill up repeatedly.
- This is normal; the water frequently drains out and builds
up in order to wash away excess foam. This feature is
called foam detection.
27

Fault Checklist

Cause

Troubleshooting - 27

2014/02/13 13:35:39